How to Install TV Antenna Greater Iran News Magazine

Learning how to install the TV antenna will help you install the antenna in the shortest possible time. TV is one of the types of products available in every home. They use this device apart from information for entertainment. That the image quality received to Buy high quality antenna It depends. The quality of the received image and the absence of noise will give you good moments; But in the case of The best antenna Use to fit your condition. The high quality of the antenna alone cannot provide you with the good quality of the received signals. Rather, it is important to install the TV antenna.

If any negligence occurs in the antenna installation, you will definitely have trouble getting the signal. To learn more about installing the best antenna My Iranian News Magazine Read or watch the video.

Installation of TV antenna

The antenna is one of the applications without the ability to get the image and sound of high quality TVs. Suppose you have purchased a high quality antenna that produces one of the world's reputable companies. Now it's time to attribute the antenna. As much as you should be careful about buying the TV antenna. As much as the installation of the TV antenna is sensitive.

Read more:

Troubleshoot

The cause of the TV's image is disconnected

Is the antenna better or a desktop?

The reason for the hot charge of the phone's charger

Symptoms of rechargeable battery failure

Cause

Equipment necessary to produce LED lamps

The cause of the warming wire

Cause

How to convert the protector into multi -way

Broadcasting and buying wholesale electrical appliances

The cause of blinking green light shield

What is the perfect cable for the power meter?

What is the best way to enhance the TV antenna?

How to connect the cable to the TV antenna

Follow the steps below to connect the cable to the TV antenna:

Make sure your TV is off

Before anything, make sure your TV is off. Connecting or removing the antenna cable can clearly damage the TV.

Find an antenna port

Find the TV antenna port. This port is usually located behind the TV and is characterized by “Ant” or “RF”. There may be more ports in some models, for example digital antenna and antennas.

Connect the antenna cable

Connect the antenna cable to the TV antenna. In some models, the antenna cable communicates directly to the TV port, while in others it is possible to use an adapter. In this case, connect the antenna cable to the adapter and then attach the adapter to the TV antenna.

Fixing the cable

Make sure the cable is connected to the antenna tightly and fixed to transfer the signal current. Also, make sure the cable is in a state of no place or connected to the TV to prevent the connection from being disconnected.

Launch TV

After connecting the antenna cable, turn on the TV and access the TV menu. Access the settings menu and setting antenna using remote controls. There may be options such as “setting antenna”, “channel search” or “signal scan” in your TV menu.

Using these options, the TV will look for television signals and will identify existing channels. Depending on the TV model and the type of signal in your area, you may need to use existing options to adjust the antenna and place the antenna the best direction and position to get a better signal.

After scanning the channels, the TV should display the best signals received and the channels can access you. You may need additional settings such as image settings, sound and subtitles, which are usually specified in the TV settings menu or user guide.

If your TV still does not receive the correct signal after these steps, you may need to re -check the antenna, cable or TV settings.

How to connect the TV antenna cable to the receiver

Follow the steps below to connect the TV antenna cable to the receiver (digital receiver or other device):

Make sure the TV and the receiver are off: Before everything, make sure the TV and the receiver are off. Connecting or removing the antenna cable in a clear mode may damage the TV or receiver.

Find an antenna port

Find the receiver antenna port. This port is usually characterized by “ANT” or “RF”. There may be more ports in some models, so see your receiver instructions.

Connect the antenna cable

Connect the antenna cable to the receiver antenna. Cooxial cable (coax cable) is commonly used to connect the antenna to the receiver. The cable will have one head attached to the receiver antenna and another head attached to the antenna. In general, you have to lift the coaxial head to the receiver antenna and turn left or right to reach the right position. Then attach the other head of the cable to the antenna.

Fixing the cable

Make sure the cable is firmly connected to the receiver antennas to transfer the signal flow correctly. Also, make sure the cable is in a state of no place or attached to the receiver to prevent the connection from loss.

Setting up and television

After connecting the antenna cable to the receiver, turn on the receiver and turn on the TV. Then connect the TV to the receiver, usually connect to the receiver TV (usually HDMI or AV) using an HDMI cable or AV cable.

Receiver settings

Access the settings menu and adjust the antenna using the Remote Receiver controls. You may need to use existing options to adjust the antenna and place the antenna the best direction and position to get a better signal.

Launch TV

Access to your receiver on the TV using the Remote TV controls. For example, if you use HDMI cable, select HDMI input on the TV.

Receiver and TV

Configure the settings for the TV and Receiver using your Receiver and TV User Guide. This may include adjustment of image quality, sound, subtitle and other related settings.

By doing these steps, you should be able to get the TV signal via the receiver on your TV and access the desired channels

How to install digital desktop antenna

One of the types of receivers available in the digital television market. That these types of receivers can only support digital antennas. Analog antennas are only for use for older analog receptors that are not used for new advanced TVs. Digital receptors can also be used in both desktop and air. In this case, how to install the TV antenna will be different.

Usually desktop antennas are used for digital TVs that can be easily installed alongside TVs. You have to put this bunch of home antennas near the TV with a small altitude, so as not to obstruct the signal and receptors.

The antenna is equipped with two ports that must be connected to the back of the TV similar to the antenna. If you are using a digital receiver, another port, called USB port, must now be connected to the back of the digital receiver. But otherwise the best thing to do is to fit the antenna type to connect the USB port to the adobe. And the adolescent is also connected to the electricity. After installing the TV antenna is now time to enter the search section. And find the desired networks easily.

Before that, you must first find the recipient's post. And place the antenna direction toward the signals. The good thing about desktop antennas is that if the signal is weak, you can easily move it. To get the antenna at best receive the signals of the desired networks.

How to install digital desktop antenna

How to install analogue TV antenna

Other TV models are analog systems. Which are known as older receptors. Analog and digital antennas can also be used to get a network in this model. (Atron brand digital antennas They are designed to be able to support all the new generation and the older generation.) Since the power or signal reception in this generation of TVs is very weak. You should use air antennas.

Because air antennas have a very high reception power compared to other existing antennas models. The reason for the high power of these antennas is mounted on the roof. And can easily receive the signal. Cable is needed to install antenna. In this distance, connect the recipient and the antenna. Installation of such antennas requires more time, on the other hand to install the antenna antenna antenna, not to reduce the quality of the received image.

● To install this antenna, you need to cut the coaxial cable 1.5 cm and its inner part to 0.5 cm to reach the cerebral wire. This cut should be such that the wire does not engage with the brain wire, which reduces the quality of the work.

• Now slowly open the antenna box to get access to the board. On the board part is 2 rings, one in large and smaller dimensions, and both are mounted on the board with the help of 3 screws. The spray of the wire must be placed in the larger loop; But the wire or brain is placed in the small ring and then the screws must be tightened.

Installation of electric TV antenna

Another very common antenna is the electric TV antenna. There are also steps to install the electric TV antenna that must be done properly. These antennas are also known as signal amplifiers. Because with a van amplifier you can buy. For such antennas, you should use copper brain wires to provide better quality.

• In the first step, you have to shave a little of the wire to pass the antenna cover. This screw should be attached to the thin head of the bare wire. And tighten by a screwdriver. To make sure, even the lower part of the jack must be tightened on the wire. So that it is not in contact with other metals and wires that are reduced.
• Now the other side of the wire attached to the antenna jack must be connected to the amplifier, which means the brain connection to the middle ring of the amplifier, which is eventually tightened with the help of screws.
• The other side of the roof is used to install the antenna, which must also be bare and connected to the amplifier loop. It is best to connect the satellite receipt to the other side of the wire. This section must be attached to the back of the antenna.
• It is now time for the amplifier to be connected to the power, which will turn on the light on the device and the antenna at the same time. How to install the electric and rotating antenna antenna is similar. Both of these antennas are equipped with a amplifier that will start rotating 360 degrees with the button on it.

Buy The best Television Antenna At the lowest price

The electricity store, as the most famous electrical appliance sales center, is proud to have your loved ones' accountability for the sale of a variety of electronic products, including antennas. This collection has been in the market for many years. And now it distributes all of its products at the highest quality and the lowest price. The antennas of this series are all manufactured by the world's most reputable companies. Designed, designed and manufactured with the best and most advanced machinery of production lines. The types of the Hui Antenna in this store are all offered at a competitive price. Like other customers, you can compare the quality and price of different store products. And finally select the best option.