TV Antenna Training Greater Iran News Magazine

Since antennas play a very important role in their type of efficiency. Their construction and use is important. This product is used to receive information signals. And the quality of their construction is very important on the quality of image and sound. Below this article from My Iranian News Magazine About how to make the TV antenna, increase the power; We provide more antenna and….

Making an TV antenna

If you are planning to build an antenna. Must adhere to all the points and steps according to the standards. The best antenna Make great quality. Of course, the antenna brand has a huge impact on its quality. And it is best to research the antenna in general. Buy a quality and high quality antenna at a reasonable price. It is as important as using an antenna to get a television image and sound. Its quality is equally important.

Because good quality is the best way to get the right quality of the TV. If you want to buy an antenna for your TV. You should consider the quality of your antenna, cable and even booster. You also have to pay for the high quality antenna. But Sama can easily make the best antenna at home in the least amount of time with several simple and even low cost.

Because a strong antenna is very important and essential for receiving analog and digital waves. Training on television antenna can be found in several possible ways to make a variety of antennas that we will mention here in the simplest way. The tutorial is to make an antenna to get analog and digital waves that make you get the best quality. The antennas all consist of different parts and equipment in every model and structure they are. That you can also make a high quality antenna with the help of these trivial and ordinary items.

Read more:

The reason for the red light to keep the shielding light

Learn to recharge the pen battery and reuse it

A pen battery recharge methods

Important steps to make television antenna

• First, it is best to cut the wood about 7.6 x 88.55 cm. The length of the wood should be divided into sections 5.08, 18.42, 31.75, 45.09 cm and mark the wood on the side of these woods to attach.
• You now need to prepare 8 copper wires at 35.56 cm and bend them in the middle. Note that from the middle point between the two ends of the wire should be 7.62 cm.
• At this point, you need to bolt and gasket to attach these pieces to the bent part of the wires on the marked points of the wood. Of course, this connection should be such that the V -shape of the wire is within the outside of the wood.
• With these copper wires, bent parts must be connected. This connection should ultimately look like 2 to x, but none of the wires should never be connected.
• It is time to prepare two reflectors that reflect the same as 38 x 22.86 cm. These reflectors must be attached to each other by a screw on the back of the board. This connection should be such that the V wires have no contact with each other.
• Now make a transformer to both sides of the piece and connect to the middle of the wires.
• In the last step, you should connect the coax cable, which is a special antenna cable, to transmit the signal in this way. The quality of the signals depends on your quality, and this quality will depend on the type of design and observance of the standards that you have paid attention to in Hussein.

Television antenna tutorial

How to make the TV antenna with the main parts

To make a simple home TV antenna, you need the following:

Cable wire

To make antenna, use a cable wire about 1.5 to 2 meters long. The cable wire works better with a larger diameter.

RF socket

A RF socket (antenna socket) is required to connect the antenna to the TV. You can get this socket from a local electronic store.

Look at the direction of the signal

Check out which direction of the TV signal comes to you. In most cases, direct the antenna to the TV tower.

After preparing the above, you can go the following steps to build antenna:

Calling cable wire

Cut the cable wire to the required length (about 1.5 to 2 meters). You may need a small scaling on both sides of the cable to provide better conductivity.

Cable wire connection to rf socket

Connect a cable wire to the RF socket using the RF plugin. At this point, make sure the connections are well closed and there is no interruption.

Putting antenna

Put the antenna at a point that receives the best signal. Can it be at the top of the TV, near the window or to any other point that can be suitable for receiving the signal,

Adjust the antenna

Rotate the antenna gently and change the direction to get the TV signal better. You may need to change the antenna several times to find the best signal.

Antenna connection to the TV

Connect the RF socket to the TV input RF port. Usually the RF port is on the back or side of the TV as “ant in” or “RF in”.

Channel Search

After connecting the antenna, turn on the TV and go to the TV input settings. From the settings menu, slowly select the settings to search the channels. This process may take a few minutes and the TV searches for all the channels.

TV settings and playback

After searching the channels, the TV will be ready to broadcast the channels. You can check the channels and start watching your favorite apps.

It is important to know that making a simple antenna at home may cause a weak or unsuccessful signal, dependence on local conditions and your distance from the TV tower. If the signal is weak, you can use more professional internal or external antennas.

Making an antenna with a fork

Making an antenna using a fork is a simple and inexpensive way. Please note that the performance of this antenna may not receive a limited and strong signal, but it can be useful when the strong signal is available. Follow the steps below to build an antenna with a fork:

Materials Required:

• A steel or metal fork with 4 branches
• Short cable wire with rf jack (antenna socket)
• Quick Connection (eg Clips)
• TV device

Cutting cable wire

Cut the cable wire about 20-30 cm long. You can use a short cable wire with a ready RF jack and cut it if necessary.

Open the fork

Open the fork so that the branches are opened in a balanced and balanced manner. This allows you to cut the cable wire between the branches.

Cable wire connection

Place the cable wire between the fork and attach it to the fork using a quick connection (eg clipper). Make sure the cable wire is well held in the connection.

Antenna connection to the TV

Connect the RF socket (RF jack) to the cable wire to the TV input RF port. Usually the RF port is as “ant in” or “RF in” on or next to the TV.

Channel Search

After connecting the antenna, turn on the TV and go to the TV input settings. From the settings menu, slowly select the settings to search the channels. The TV has to automatically search and save the channels.

TV settings and playback

After searching the channels, the TV will be ready to broadcast the channels. You can check the channels and watch your favorite programs.

With this simple method, you can build a simple and cheap television antenna in your home. However, its performance may be lower than professional antennas and the ability to receive a weaker signal. If you have an inappropriate signal, you can use more powerful and professional antennas.

Making TV antenna with simple and home appliances

With simple and home appliances, you can create a simple TV antenna. Below, I will explain to you how to make the TV antenna with simple tools:

Materials Required:

• Copper wire with a length of about 1.5 to 2 m
• A paper or plastic packet of foil paper type
• Nozzle of heat glue or cold glue
• Metal tip pen
• RF connector or antenna socket

Steps to build antenna

Cut copper wire

Copy the copper wire to the required length (1.5 to 2 m).

Practice the wire

It slowly practice the copper wire to make the spiral shape. To do this, touch it from afar and gently practice the wire between your two hands to bend the spiral.

Creating the antenna base

Consider one of the end of the copper wire as the base of the antenna and bend it to the U -shaped. For example, you can bend the wire around the metal tip to take the U -shape.

Putting the foil layer

From a paper or plastic packaging that uses a foil paper type, remove a sheet and place on the antenna base. The foil layer should be well placed on the base of the antenna.

Foil layer stabilization

Using a heat glue nozzle or cold glue, glue the foil layer to the antenna base. Make sure that the foil layer is firmly attached to the antenna base without moving. Make sure no collision between the copper wire and the foil layer.

Connect the RF connector or antenna socket

At the other end of the copper wire, connect the RF or antenna socket. Depending on the type of connector or suction you have, you may need welding or mechanical connection.

Antenna connection to the TV

Connect the RF socket or the antenna RF connector to the TV's RF port. Usually the RF port is on the back or side of the TV as “ant in” or “RF in”.

Channel Search

After connecting the antenna, turn on the TV and go to the TV input settings. From the settings menu, slowly select the settings to search the channels. The TV has to automatically search and save the channels.

TV settings and playback

After searching the channels, the TV will be ready to broadcast the channels. You can check the channels and watch your favorite apps.

With this simple method using home appliances, you can build your TV -compatible TV antenna.

Buy the best antenna from the electric store

Electricity Company is the first and most prestigious center for all kinds of electrical and industrial equipment in the market. That has a long history. The company has the best quality parts and supplies to produce the world's renowned companies on its sales list.

If you are planning to buy first -rate antenna with the power to receive high signal. Contact the sales box of this collection right now. Note that access to this collection will be available online and within 4 hours of the day. A good opportunity, the ideal shopping experience of a reputable store that brings us the best.